On June 11-12, you’ll find DME in Booth #305 at amerimold 2013 a trade show, technical conference and networking event in Rosemont, IL, that connects mold manufacturing and plastic injection molding. A leading manufacturer of mold technologies, DME will be featuring products from their extensive moldmaking supplies offer including:
· 16-Zone Hydraulic and Pneumatic Valve Gate Sequencers – With an increased number of timer-based zones from 4 to 16, DME Valve Gate Controllers offer faster response than typical valve gate controllers while maintaining the same reliability and accuracy. This highly efficient sequencer also greatly reduces electrical use over the life of the unit. Plus, its new PLC touch screen makes controlling the system easier than ever.
· Indexable Mold Date Insert for blind hole applications –The Indexable MDI cuts maintenance and change-out time by allowing molders to unscrew the date stamp from the parting line of the mold, while the mold remains in the press, instead of having to knock it out via a through-hole built into the mold. This increases the available options for location of the date stamp, giving molders the flexibility to place a date stamp at the optimal part location.
· D-Max Hot Sprue Bushings – High performance D-Max Bushings have two zones of heat: a slip-on, cast-in heater on the nozzle body and a square coil heater on the head area of the nozzle – providing a more uniform heat profile than traditional square coil heaters. The square coil heater uses a separate thermocouple and gives the user an accurate temperature reading to eliminate the heat soak time normally needed.
· SMARTFLOW® DUOFLOW™ cooling system manifolds – Made of robust extruded aluminum, these economical manifolds are similar to the original Smartflow one-piece design, but also offer versatile mounting due to smaller size. Duoflow manifolds feature a proven design for reliability and improve overall production by helping equipment operate more efficiently and serving to reduce tool change time.
“DME has been a longtime supporter of amerimold and we’re always excited to be part of this show environment that allows us to meet and share ideas with not only customers but our colleagues as well,” said Dave Lange, Director of Sales for DME. “We look forward to sharing our latest technologies that maximize precision and efficiency such as the D-Max Hot Sprue Bushings and our new Valve Gate Controllers.”
Stop by DME’s booth at amerimold to learn more about these products or visit www.dme.net for more information.For more information on amerimold, visit :www.amerimoldexpo.com/